Showing posts with label medical device companies. Show all posts
Showing posts with label medical device companies. Show all posts

Tuesday, August 10, 2010

Latex Free Labeling

For a new device we spent a bit of time working on "Latex Free" labeling.  From the FDA point of view (801.437), the key point is natural rubber.  The term "natural rubber" includes natural rubber latex, dry natural rubber, and synthetic latex or synthetic rubber that contains natural rubber in its formulation.  So while your label coatings may contain latex to give them that glossy look, its most likely synthetic latex (although not always), and you're off the hook.



ASTM D6499 (LEAP assay) can be used to determine if your device tests positive for natural latex and is reasonably cheap insurance that your product is safe.



Recently BS EN980 added a Latex symbol for devices that contain latex.  However, there isn't a corresponding recognized symbol for latex free, so the words Latex Free seem like the way to go.  Many companies, including GE and 3M, use the Latex symbol with an X through it.



While it is easy enough to lay off the latex gloves in your assembly area, what are your suppliers or their suppliers doing?  Although it seems far fetched, a polymer resin handled with someone wearing latex gloves could make its way into your molded part.  I can assure you, tracking down this information is a pleasant way to spend a week.  Updating your Certificate of Conformance requirements from the product development seems like the easiest way to go.



Sunday, April 25, 2010

Annual review of received parts' dimensions

Many companies perform an annual review of every dimension or 100% inspection on all received parts. While this may serve as a halfway decent preventive action, I'm not convinced it is worth it. If you have automated inspection methods, maybe then it is not too much effort, but we're still using hand tools or manual adjustments for the majority of our parts.

You could argue that you have a critical device, we have to check for dimension drift. Well why aren't you checking for that anyway? And if it is so critical shouldn't you have insured that the supplier's process was capable before you even signed up with them? If it is truly critical and you're not checking it but once a year, good luck with that.

Additionally, if you do find something out of specification, nine times out of ten it is going to be on a non-critical dimension, or else you would have caught it in receiving inspection or manufacturing anyway. Once you find the out of spec item, you have to go back to your inventory, check it, then justify why it is either okay and change the specification, or send it back, and jump through hoops to justify why it was okay to use on the ones sold, but not okay to use going forward, or whatever other contortions QA wants.

In my experience these generally boil down to unclear or unnecessary specifications or measurement issues, where to start measuring a curve, a hole over specified, etc. Another argument for doing it right the first time and checking your supplier's process.

However, this if often a difficult battle, as new parts are generally part of R&D efforts and the team from R&D is behind schedule and they always try to make up schedule time by trying to get either quality or manufacturing to compromise on one issue or another (I *may* have pointed this out at a meeting once). If this happens and you don't have time to ensure supplier process capability, it is not the worse thing in the world, you can always blame the vendor and shop around for a new one that has no familiarity with the part and uses the same process that can't meet the specification. Sometimes the best you can do is make the risks clear.



Thursday, April 22, 2010

Things I never thought I'd have to worry about

A volcano in Iceland slowing shipments to and from Europe, since we ship everything by plane now. Inventory costs money but so do lost sales.

The longshoreman strike on the west coast about five years ago also slowed me down, back when we shipped by boat. Then it was product development and not production so it wasn't as urgent. We just moved to another piece of the project.

Everyone loves the idea of second sources, but small companies don't have time. Each new supplier of a custom part generally requires dozens of hours of training. "If you don't take that burr off, its not going to meet the specification. Please mask those holes next time like it clearly states on the drawing, etc." I can only improve the products or the business at once, take your pick. Improving products improves the business, although that is no good if you're out of business.

So you pick critical parts and go from there. A machine shop, you can get up to speed fairly quickly if you spend the time. Extruded tubing, not so fast, there is a 12 week material lead time, better plan for that. And even better is that some regulators want to be notified of a supplier change or even an alternate. We also implemented a finance check based on the current economy, but that has been a waste of time, our suppliers should do a finance check on us!



Monday, April 19, 2010

Pot and Medical Device Manufacturing

California is set to vote on marijuana legalization later this year. I'm pretty much a live and let live guy, but how is this going to effect California's fairly large drug and medical device industry? I'm sure people will debate this, but lets cut right to how companies will see it:

In California you will have a much higher chance of someone stoned building your product and on average stoned people make worse decisions than non stoned people.

This probably doesn't matter if you're renting movies at BlockBuster, but small mistakes in medical devices can cost lives and / or millions of dollars. Right now most companies mitigate the risk of drug use by screening on hire and periodic screening. How would you mitigate in the future, or is my fear overblown? I don't think legalizing pot will help manufacturing in California, obviously that is not the only consideration, but an important one I think.



Sunday, April 18, 2010

Finding Owners

More and more I'm learning one of the keys to making good devices that meet quality and regulatory standards is finding people who will take ownership. Lately I've been working in the packaging area a lot and almost every time I'm in there I find discarded labels without lines drawn through them. Of course these are always discarded by the other shift. Everyone already knows the labels need lined out when questioned, so the basic training is there.

If you're an owner, you walk into your area and you own it top to bottom. You don't not fix things because you weren't around. You correct the issue and take it up with the supervisor on shift change. These are the types of people you want, and why many large medical device companies pay way over what they could for manufacturing labor. Pointing out the same non conformance over and over to the same people is ridiculous.

I've been involved with contract manufacturing in China and they were excellent at following instructions. They picked up GDP about 3 times faster than anyone else and have maintained it. This is not to say everything is perfect, but the basics were taken care of. Some of the more complicated situations that came up with the contract manufacturer were really botched up before we were notified, but at least I know the easy stuff is covered.

I'm not sure that me telling the 19 year old putting labels on boxes that this is the era of global competition and she has to work smarter and harder than they are really sinks in. Hopefully, we have a chance to develop the skills necessary because you only get so many chances.



Tuesday, July 14, 2009

Separation of powers

As a "project engineer" I've come to appreciate why larger companies put R&D in a different building- so they can get something done. Anytime part of your duties include supporting manufacturing, you have a very hard time setting aside enough time to accomplish significant design goals. Instead the manufacturing support gets done and the development that can be done reasonably quickly gets done in spare time, research a new fitting-sure. Seriously, there is nothing I can do about part Z getting here 3 weeks late, yet I am dragged into those discussions all the time.

So if you're running a company or managing engineers, keep your functions separate, or else realize that someone working 25% on manufacturing support is in reality going to spend 75% of his time on it. Don't even drag them into it, you might help in the short run, but in the long run you're worse off if the entire company is running around putting out the fire of the moment.